Safety Rail Systems


Track and car systems have long been used to provide a mobile attachment point for crew when cleaning the hull, superstructure and windows of large motor yachts and other vessels. With today’s greater awareness of workplace risks, boat builders and surveyors are seeking to ensure a high standard of safety by specifying systems that are purpose designed, tested and standards approved.

Ronstan supports this approach, which can only improve the safety and security of the persons using these systems in their everyday work, and has developed safety rail systems which have been tested and certified.

Ronstan safety rail systems

Ronstan safety rail systems provide a method of attachment for use in conjunction with personal protection equipment to protect against falls from a height, such as when working outside of conventional guardrails for cleaning and maintenance purposes on yachts or other vessels. They should not be used for lifting equipment or any other purpose

Track rail mounted in vertical plane
Track rail mounted in horizontal plane


System Description

The complete safety rail system consists of the following components:

– One track rail with stop holes at 50mm (1 31/32”) centres and mounting holes at 100mm (3 15/16”) centres.
– One tandem car assembly consisting of two cars joined together with a connecting plate.
– Each car has a single attachment point for personal protection equipment.
– One of the cars has a spring-loaded plunger to allow the assembly to be fixed in position at any of the stop holes along the track rail. This plunger can be disengaged to allow the free movement of the car assembly along the rail.
– Two end stops installed at the extremities of the track rail.

RCC22-2A Tandem Car

RCC22-3A & RCC22-5
(Optional Equipment Car & Connector Plate)

End stop cover plate

Car connerctor plate

Track Rail

EN795: 2012, TYPE D

The Ronstan safety system is tested, certified and approved to the recognised European Union standard for fall protection equipment (EN795: 2012, Type D), and is suitable for single-person use as an anchor device by crew working at height. The “trolley” cars, track rails and end stops for this external access system are made from marine grade aluminum alloy and are anodised for corrosion protection and long service life. The spring loaded stainless steel plunger on the car allows for simple repositioning at any stop hole location on the track rail, or it can be disengaged to allow free movement of the ball bearing car along the track rail.

Ronstan safety rail systems are available in two sizes, Series 22 (22 mm wide track) and Series 30 (30mm wide track) with options for single or tandem cars.

Fall Protection System - GAMMA DI PRODOTTI

Fall Protection System - SUPPORT

Product Support & Information Downloads

CONTATTI via Meucci, 3 – Z. I. Aussa Corno 33058 San Giorgio di Nogaro (Ud) – Italy
T +39 0431 65575 /

© Copyright 2022 – Armare s.r.l. – P. IVA IT 02841690304 – All rights reserved